Serial connector

DNS-300 has soldered 5 pin COM-TTL connector like DSL-G604T. To use it with PC you need a RS-232 ↔ TTL adapter.
I've used schema from McMCC site:
Local copy

I've disconnected pin 1 from RS-232 on this schema to use it under WinXP HyperTerminal.

Serial settings: 19200, 8 bit, no parity, no hardware sync.

hardware/serial_console.txt · Last modified: 2006/07/16 00:32 by sergeyzh
CC Attribution-Noncommercial-Share Alike 4.0 International
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0