===== Bootlog of Linux kernel =====
==== Messages on Power on ====
Link Down
Ethernet eth0:: MAC address 00:13:46:fd:21:e2 IP: 192.168.0.101, Default server: 0.0.0.0
==> enter ^C to abort booting
Searching Kernel Flash Image ....OK
Varifying checksum .......OK
Uncompressing Linux .................................................................... done, booting the kernel.
.Linux version 2.4.18_mvl30-integrator (root@BBDHServerLinux) (gcc version 3.2.1 20020930 (MontaVista)) #1036 Wed Jul 13 15:49:06 CST 2005
CPU: ARM/STORLINK FA52Xid(wb) revision 1
Machine: Juno
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttySL0,19200 root=/dev/ram
Bus: 116MHz(3/2)
Calibrating delay loop... 69.83 BogoMIPS
Memory: 64MB = 64MB total
Memory: 45832KB available (1809K code, 275K data, 176K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers disabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Watchdog Timer Initialized
Starting kswapd
Disabling the Out Of Memory Killer
NTFS driver v1.1.22 [Flags: R/O]
SGI XFS with quota, no debug enabled
i2c-core.o: i2c core module version 2.6.2 (20011118)
i2c-algo-bit.o: i2c bit algorithm module version 2.6.2 (20011118)
SL3316 I2C Adapter Init ver 1.00
pty: 256 Unix98 ptys configured
sl3316_gpio.o: Alpha GPIO Driver 1.00 Initialization
sl3316_gpio.o: register for misc device minor=97
GPIO Initialized
Alpha PCA9555 utility Version 1.00.000 for ANS-1000A
pca9555_mod.o: register for misc device minor=99
PCA9555 init finished
Alpha Button Driver Version 1.00.003 for ANS-1000A
Real Time Clock Driver v0.10
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
EMAC initialized for A3 Chip !
Configure VID 1
ttySL0 at MEM 0x22000000 (irq = 6) is a SL2312
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
SL2312 MTD Driver Init.......
SL2312 MTD Driver Init Success ......
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
NET4: AppleTalk 0.18a for Linux NET4.0
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 16384K
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 176.serial console detected. Disabling virtual terminals.
.init started: BusyBox v0.60.3 (2003.12.16-16:56+0000) multi-call binary
.Utility for LED Testing
request cmd = 4111
. 5632+0 records in
5632+0 records out
Mounting local filesystems...
Hostname: DNS-300.
Storlink eth0 address = 001346fd21e2
eth0 Link encap:Ethernet HWaddr 00:13:46:FD:21:E2
Utility for LED Testing
request cmd = 4102
Power Button Utility v1.00.00
Utility for LED Testing
request cmd = 410e
.
Please press Enter to activate this console.
sh: /usr/local/bin:/usr/local/sbin: No such file or directory
root@DNS-300:/#
==== Messages when you press Power button ====
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide 1: physical = 52800000, virtual = c502a000, irq = 3
ide0: BM-DMA at 0xc502a000-0xc502a007, BIOS settings: hda:pio, hdb:pio
hda: ST3120026A, ATA DISK drive
ide0 at 0xc502a020-0xc502a027,0xc502a036 on irq 3
init_idedisk_capacity: 234441648: 234441648
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=232581/16/63, (U)DMA
Partition check:
hda: hda1 hda2 < hda5 > hda3
XFS mounting filesystem ide0(3,1)
XFS mounting filesystem ide0(3,1)
ide0: unexpected interrupt, status=0x58, count=1
XFS mounting filesystem ide0(3,1)
Adding Swap: 65988k swap-space (priority -1)
XFS mounting filesystem ide0(3,1)
XFS mounting filesystem ide0(3,3)
~ {s . {oM usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:09.3: PCI device 17a0:8084
ehci_hcd 00:09.3: irq 64, pci mem c5052000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:09.3 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
ehci_hcd 00:09.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
1
2
12 01 00 02 09 00 01 08 00 00 00 00 00 00 00 00 00 00
12 01 00 02 09 00 01 08 00 00 00 00 04 02 03 02 01 01
3 ep[e].wMaxPacketSize=2
hub.c: USB hub found
hub.c: 4 ports detected
usb-uhci.c: $Revision: 1.275 $ time 09:34:20 Jul 11 2005
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xf3000400, IRQ 64
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
1
2
12 01 00 01 09 00 00 08 00 00 00 00 00 00 00 00 00 00
12 01 00 01 09 00 00 08 00 00 00 00 00 00 00 02 01 01
3 ep[e].wMaxPacketSize=8
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
sysmgmtd[145]:
sysmgmt create daemon start...
sysmgmtd[147]:
system management service daemon started.
sysmgmtd[147]: loading config file /bin/config.xml(1766 byte).
sysmgmtd[147]: All handler start service: 1
sysmgmtd[147]: All handler start service: 2
sysmgmtd[147]: All handler start service: 3
Descriptor buffer init......
Link Up (786d) 100M/Full
Flow Control Enable.
Storlink eth0 address = 001346fd21e2
Enable MAC Flow Control...
root@DNS-300:/#